Which installation method will allow connectivity

In this mode, all the information you would normally provide using the installer dialog boxes you enter in an initialization file. For more information, see Running the Installer Noninteractively. Step 3: Enter identification and license information.

Step 5: Review the software licensing agreement. Step 6: Specify type of installation must choose Custom. See Choosing an Operating System Installation Method and the chapter that corresponds to the operating system that you want to install. The topics in this section describe how to prepare your server for operating system installation:. If you want to install a different operating system or reinstall the Solaris 10 operating system, use the Erase Primary Boot Hard Disk option on the Sun Fire X M2 Server Tools and Drivers CD main menu, which enables you to erase previously installed operating systems to make room for the new installation.

All user data is lost. Be sure to back up all data on the hard drive before performing this action. To erase the primary boot hard disk:. Back up all data that you want to save on the hard drive. When the main menu appears, select the following option from the Tools and Drivers CD main menu:. Erase Primary Boot Hard Disk. This option erases all partitions currently located on the primary hard drive, except for the diagnostic partition.

If the diagnostic partition is present, it remains untouched. If you plan to install an operating system on the Sun Fire X M2 server, you need to make sure that the BIOS is set up correctly before you install the software.

See the procedure that matches the operating system you plan to install. If the default has not been changed, you do not need to perform this setup for the for a Solaris or Linux operating system. As Ubuntu Linux to manage almost all file systems that exist today. Each of the selected file systems has disadvantages and advantages of each.

When this has many applications that can be used to process and file system partition on the hard drive. Changes made after installation partition can allow the loss of data. Therefore, it needs good planning related to the determination of the structure and file system that will be used. There are many partitions can be created for the Linux operating system. The following are the partitions that are commonly used. Its role is similar to drive C: in Windows XP. On every Linux installation is partitioning always be made.

The file system that is used to format this partition is ext4. The minimum size of this partition is 5 GB. A minimum of 8 GB to more freely install other programs.

This partition can contain user data. Data herein can include documents, images, audio, video and user application configuration. This is similar to the Documents and Settings folder or Users on Windows. The file system on the partition also typically use ext4. The magnitude of this partition can be determined based on the amount of data which is likely to be generated. This partition can not be made. If you created will be useful later on during the installation of the multi-boot operating system.

The file system is also generally able to use ext4. This partition can be used as additional RAM virtual memory. This is useful when the system runs out of RAM physical.

The more the number of applications that run the greater the amount of RAM used. In Linux there swapping the term used to denote the process of moving a page of memory RAM to swap. The page is in the memory blocks.